Helium 5G Radio CPI Registration Guide
You need CPI approval to get your miner to start earning rewards. Here's how a short guide on how to get approved.
You need CPI approval to get your miner to start earning rewards. Here's how a short guide on how to get approved.
Step 1:
When connected to the same network go to this link to access the FreedomFi local dashboard:
http://freedomfi-gateway.local/
Step 2:
Scroll to the bottom and make sure the unit is up to date, press "update gateway" A green message at the top will tell you if it is up to date.
Step 3:
Now that the unit is up to date, at the top tap on "Radio Dashboard"
Step 4:
If you see "No supported radios are attached to
FreedomFi Gateway" This is normal and can take a day or two for the Baicells to update and then they will show up.
Step 5:
Once you see the radios, tap on the selected radio you want to register and then scroll to the bottom and tap on "register radio"
Step 6:
Now it's time to upload the photos we took before and fill in the required information about street address and height. When finished press submit at the bottom.
Step 7:
You are now finished and should get a confirmation number about your process being submitted, it can take a couple days(2-5) to get approved. An email will be sent with your result. Then you will be earning MOBILE tokens.
Keep an eye out in your email for the approval!